Ozone Plate Cleaning Information for Alpine Air Purifiers US

Home

Products
Classic
XL-15
Breeze
LightningAir LA2
Peak
Flair
LightningAir LA4
Eagle 5000
Ozone Generators
LightningAir Ionizer
LightningAir Industrial
Mini-Mate
Auto-Mate

Replacement Plates

Info About:
Air Purifiers
Air Filters
Air Cleaners
HEPA Filters
Alpine

Customer Info
Our Guarantee
Human Assistance
View Cart
Checkout
Return Policy
Shipping

E-mail Us

Cleaning Instructions

Ozone Plates

Ozone plates should be cleaned every 1 - 3 months, more often if used in a smoking household or environment. Even with diligent cleaning and maintenance these plate(s) wear out between 1-7 years depending on use and maintenance, etc.

Carefully remove the ozone plate from the card cage by grasping the middle of the edge nearest to you and slowly pull it straight out.

Clean the plate with hot water and ammonia in a 50/50 solution. You may use a toothbrush if needed, scrubbing gently to avoid fractures. Rinse with hot water and allow to dry completely. A hair dryer may be used if needed.

MAKE SURE PLATES ARE DRY BEFORE REINSTALLING INTO UNIT.

Reinstall plate gently, making sure that the electrical tabs are in contact with the plate. Turn on unit to ensure proper placement. If the unit begins to produce ozone, you have cleaned and installed the plates properly.

Plate Card Cage

Before installing new or cleaned plates, be sure to clean the white stand-off's at the corners of the plate card cage. The easiest way to do this is with a cotton swab and alcohol. Once this area is clean, insert new or cleaned plates into the slot as before.

Please call customer service if you have any questions:
1-406-889-5288


	• Classic • Breeze • Peak • LightningAir • Eagle 5000 • Ozone • Mini-Mate • Auto-Mate • Replacements • More!


	• 3 Yr Warranty • Up to 5000 sq ft • Use In Homes • Use In Bars • Use In RV's • Ozone Options • Uses low power • Plug and go

Alpine Air Purifiers US

Call Us: 1-406-889-5288

Email: info@alpine-air-purifiers-us.com

alpineship.htm